Skip to content

STM32L496G-DISCO/MONARCH#

Integrate your P-L496G-CELL02 Discovery kit board along with the Sequans' Monarch GM01Q-STMOD expansion board.

Prerequisites#

  • The STM32L496G-DISCO/MONARCH board with a USB cable.
  • Installed STM32CubeIDE.
  • Installed minicom (for Linux) or RealTerm (for Windows) or other serial communication program.
  • A user with access to the Coiote IoT Device Management platform.

Step 1: Cloning the Anjay freeRTOS client repository#

Enter the command line interface on your machine and paste the following command:

git clone --recursive https://github.com/AVSystem/Anjay-freertos-client

Step 2: Compiling the board#

  1. Connect the STM32L496G-DISCO/MONARCH board to a USB port of your machine.
  2. Go to the STM32CubeIDE.
  3. Import the project cloned in the previous step to your workspace:
    • From the navigation bar, select File and click Import.
    • From the General list, select Existing Projects into Workspace and click Next.
    • In Select root directory, indicate the catalog containing the cloned Anjay freeRTOS client repository.
    • In the Projects field, select Anjay-freertos-client-STM32L496G-MONARCH and click Finish. Import project
  4. In the Project Explorer, navigate to the Anjay-freertos-client-STM32L496G-MONARCH project:
    • Right-click on the project name and select Build Project. The build should take less than one minute to complete.
    • After the build is finished, right-click on the project name, select Run As and click the 1 STM32 Cortex-M C/C++ Application option.
      • In the Lauch Configuration Selection, choose the Anjay-freertos-client-STM32L496G-MONARCH option and click OK.
  5. After the build and run are complete, the board is now compiled.

Step 3: Configuring the Client#

  1. With the board still connected to a serial port interface, open a serial communication program.
  2. Press the reset button located on the board. This should trigger the following prompt:

    Press any key in 3 seconds to enter config menu...

  3. Press any key and in the configuration menu, change the default credentials to your data by following the instructions presented in the program and save it. Client configuration

Step 4: Connecting to the LwM2M Server#

To connect to Coiote IoT Device Management LwM2M Server, please register at https://www.avsystem.com/try-anjay/.

To connect the board:

  1. Log in to Coiote DM and from the left side menu, select Device Inventory.
  2. In Device Inventory, click Add device.
  3. Select the Connect your LwM2M device directly via the Management server tile. Add via Mgmt
    1. In the Device credentials step:
      • In the Device ID enter your board endpoint name, e.g. test_device. Device credentials step
      • In the Security mode section, select the PSK mode:
        • In the Key identity field, type test_device
        • In the Key field, type the shared secret used in the device-server authentication.
    2. Click the Add device button and Confirm in the confirmation pop-up.
    3. In the Connect your device step, wait for the board to connect.
    4. Click Go to device to see your added device dashboard. Registered device

Last update: September 16, 2021